Some commands and information to help with Bookworm OS Manually create a system image Reload systemd manager configuration. This command should not be confused with […]
BLE to MQTT Gateway and connecting via WiFi and Ethernet
Due to difficulties connecting nRF24 sensors to my heating system, because of distance problems, I decided to investigate using Bluetooth Low Energy (BLE) sensors, connected […]
MaxAir – Configure Key-Based Authentication SSH
When trying to login to MaxAir by SSH, you need to remember the Username, Password and IP address. This can be a pain as well […]
MaxAir Problems and Solutions
Problem: Can’t log out from user admin in the GUI, Clearing cache had no effect. Solution: clearing the userhistory table solved the problem Log into […]
Complete Backup of MaxAir on a running system + Incremental Backups
This has now been superseded by the install program on MaxAir, but it is still relevant for backing up other pi projects. Rather than remove […]
MaxAir – Clean Installation
Clean installation sequence for my heating system Download the latest MaxAir Image:- 32 bit Ver 3.00 Build 22032364 bit Ver 3.00 Build 220323 Alternatively, go […]
Setting up Fail2ban on a Raspberry pi
What is Fail2ban? It’s a piece of software that attempts to block malicious connections to your device, which in my case is a Raspberry Pi. […]
MaxAir – Control of my heating via a smartphone – part 1
PiHome and MaxAir I thought I’d relate some information about home automation and heating control, which might help others. I wanted to control the heating […]
Raspberry pi – Useful commands
Some general commands and some specific to MaxAir A lot of commands require root access. Either log in with root password: This requires root password […]