To configure systemd to automatically mount a network folder on boot, you need 2 files mnt-pibackups.mount # The .mount file specifies how to mount a […]
BLE to MQTT Gateway and connecting via WiFi and Ethernet
Due to difficulties connecting nRF24 sensors to my heating system, because of distance problems, I decided to investigate using Bluetooth Low Energy (BLE) sensors, connected […]
MaxAir – Configure Key-Based Authentication SSH
When trying to login to MaxAir by SSH, you need to remember the Username, Password and IP address. This can be a pain as well […]
MaxAir Problems and Solutions
Problem: Can’t log out from user admin in the GUI, Clearing cache had no effect. Solution: clearing the userhistory table solved the problem Log into […]
Remove the Red X from mapped network drives
Having set up the mapped network drives here I needed to stop the Red X from appearing when the mapped drives weren’t seen but were […]
Mapped Drives not reconnecting at startup – Windows 10, and Windows 11 – Solved
Background… I’ve had problems for years where the mapped network drives would not reconnect during the startup of windows. I’ve searched the internet and found […]